Filter
Top Products
TO ATTACH HANDLE TO
CLEANER
I.
Remove tape and screw from handle socket and set aside for later use.
2.
Connect electric plug from bottom of handle to electric plug projecting
from handle socket. Make sure plug assembly is positioned as shown
in illustration.
3.
Push handle into place in handle socket. The excess wire and electric
plugs are guided into handle tube.
4. Line up holes in handle and handle socket. Insert screw and tighten
with screwdriver.
HANDLE
ADJUSTMENTS
-
The handle on your clean-
er has three positions
-
storage, operating,
and
low (for reaching under
low furniture). The handle
can be lowered by step-
ping on pedal at the left
rear of
cleaner. The
handle should always be
in storage position when
cleaning tools are used.