Filter
Top Products
WHAT
YOU
SHOULD
KNOW
ABOUT
THE
BELT
The belt of your Hoover cleaner controls the speed of the agitator
and is important for the efficient operation of your cleaner. Be-
cause of this, when buying a new belt, you should always insist
on a genuine Hoover belt. Some other belts on the market, not
manufactured under Hoover design and quality controls, do not
operate the agitator correctly and create undue stress which will
damage your Hoover cleaner.
The use of other than genuine
Hoover belts voids your
guarantee.
Genuine Hoover belts have
the name HOOVER. printed on the belt.
THE BRUSHES
WHEN
TO
REPLACE
BRUSHES
The brushes on your cleaner are
made of quality nylon which will
last approximately four times longer
than horsehair. Check occasionally
by laying a piece of cardboard
across nozzle. If bristles do not
touch the edge of cardboard, new
brushes are needed. Always replace
both brushes at the same time.
TO
REPLACE
BRUSHES
Remove the belt and agitator,
following directions given on
Pages 10 and 11.
I. Turn end plates
in opposite di-
rections until
one plate comes
off.
12