Filter
Top Products
Floor surface selector
(some models)
Carpet or rug cleaning
When using the power nozzle for
carpet and rug cleaning, push the
floor surface selector button toward
“RUG” (A). This setting provides the
suction and agitator action necessary to
deep clean carpets. The nozzle adjusts
automatically to various carpet pile
heights.
Deluxe power
nozzle
Handle positions
The handle has two positions
when used with the power nozzle:
upright and operating.
To lower handle to operating position,
place your foot firmly on the power noz-
zle and pull handle back.
Check bag indicator
The indicator will begin to show red
as bag fills with dirt. There are three
conditions that will cause the indicator to
become completely red:
1. The bag is full; change the bag.
2. Very fine materials (such as powder)
have been picked up, clogging the bag
pores; change the bag, even if it is not full.
3. There is a blockage in the nozzle, hose,
tools, or at the bag opening; remove the
blockage.
On some models two switches are
used to turn the cleaner on for opera-
tion.
Press remote control switch (C) on
hand grip to the “OFF” position
before plugging cord into electrical outlet.
Plug cord into an electrical outlet and
step on ON-OFF pedal. The POWER
ON light will glow, indicating that the
cleaner can then be controlled at the
hand grip. Press hand grip switch to
the ON position.
POWER
FLOOR
SURFACE
O
F
F
O
N
B
A
R
E
R
U
G
ON-OFF switches
After assembling cleaner, plug
cord into electrical outlet. Turn
cleaner on by depressing ON-OFF
pedal (A). To turn cleaner off, depress
pedal again.
Note: Pedal opposite ON-OFF pedal is
Cord Rewind Pedal (B).
4
Push plug on power nozzle cord
completely into receptacle
underneath hand grip.
Always disconnect cleaner from elec-
trical outlet before attaching or
removing power nozzle plug.
8
8
9
9
10
10
To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other). This
plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to
install the proper outlet. Do not change
the plug in any way.
A
C
B
11
11
12
12
POWER
FLOOR
SURFACE
O
F
F
O
N
B
A
R
E
R
U
G
13
13
A
How to use