Hoover S3621 Vacuum Cleaner User Manual


 
2
Unpack cleaner from carton and
identify the parts shown.
Remove and dispose of cardboard
packing.
A. Canister cleaner
B. Power nozzle
C. Extra paper bag (one bag is
installed in cleaner)
D. Extension wands and hose
A
B
C
D
POWER
SPEED
FLOOR
SURFACE
1. Combination carpet and floor
power nozzle: automatically
adjusts to different carpet pile
heights.
2. Headlight
3. Spring latch: locks extension
wands together or locks wand to
nozzle or tool.
4. Wand storage clip*: place cleaner
on its end and hook clip onto bottom
of cleaner.
5. Extension wands: used with rug
and floor nozzle. One or both
wands may be used with cleaning
tools.
6. Wand/tool latch: used to lock hand
grip to extension wands or cleaning
tools.
7. Floor surface selector button*:
push button toward “RUG” for carpet
cleaning or “BARE” for hard surface
floor cleaning.
8. Hand grip
9. Remote ON/OFF switch*: located
on the hand grip for convenient
cleaner operation.
10.Remote variable speed control*:
allows user to manually select
cleaner speed at the hand grip.
11. Receptacle: connect power nozzle
cord underneath hand grip.
12. Dusting brush
13. Crevice tool
14. Hard floor tool
15. Furniture nozzle
16. Power ON light*: glows when
cleaner can be controlled at the
hand grip.
17. Suction regulator*: close for
maximum suction, open if power
nozzle is difficult to push or light
weight rugs or draperies are being
cleaned.
18. Large wheels: provide easy towing
when cleaner is pulled over carpet,
area rugs and door sills.
19. Cord rewind pedal: step on pedal
to rewind cord for storage. Hold
plug until cord is rewound.
20. Micro filter: aids in filtration of dirt
particles.
21. Tool lid: pull up on edge of lid in
recessed area.
22. Bag lid latch: lift to open bag lid.
23. ON/OFF pedal: conveniently
located on top of cleaner.
24. Check bag indicator: shows red
when paper bag should be
checked for fullness.
25. Hose connector
26. Receptacle: connect power nozzle
cord to canister cleaner.
27. Carrying handle
28. Belt check window*: motor pulley
will be visible in window if belt is
broken.
*Available on some models.
This cleaner is intended for house-
hold use.
1
2
3
4
5
6
6
17
11
11
12
13
14
16
18
19
20
21
22
23
24
25
26
27
28
15
7
7
8
8
9
9
10
10
1
1
2
2
The assembled cleaner will look like
the drawing.
Operate cleaner only at voltage speci-
fied on data plate on bottom of clean-
er.
Unpacking
Cleaner
description