Filter
Top Products
To attach the hose to the extension
wands, push latch (F) on the hand
grip to the unlock symbol.
Push the hand grip (G) down onto wand
so that the button projection (H) fits into
the slot. Push the latch to the lock
symbol to secure wand.
Attach second wand to the first.
Position cord into cord clips (E) on
wands, placing excess cord between
nozzle and bottom cord clip.
Note: Bottom cord clip is on wand stor-
age clip.
Insert plug as deeply into the
receptacle as possible. Latch (A)
will automatically fasten. Cleaner will
not operate unless plug is inserted into
receptacle.
To disconnect hose, first remove hose
cord plug from receptacle while pulling
out on latch. Then, depress buttons
(shown in Fig. 3 by arrows) on hose
connector and pull up.
Note: The flexible hose contains
electrical wires for connection to the
power nozzle and should not be used
if damaged. The wires should not be
seen through the outer skin.
Connect hose
With hose toward front of cleaner,
push hose connector into opening
in bag lid.
When hose is attached properly, hose
cord plug will reach to receptacle on
cleaner.
3
3
3
4
4
Questions or
Concerns?
The Hoover Company wants to quickly
resolve any concerns about your cleaner
or questions regarding its use. Look on
the list provided with the product for
your local Hoover Factory Service
Center or in the Yellow Pages under
“Vacuum Cleaners - Household” for the
nearest Authorized Hoover Warranty
Service Dealer (Depot) or call:
1-800-944-9200 for an automated
referral of authorized service outlet
locations (U.S. only OR
1-330-499-9499 to speak with a repre-
sentative in the Hoover Consumer
Response Center OR
Visit us online at
www.hoovercompany.com to find the
service outlet nearest you (click on the
“Service” button).
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE OR SEND
IT TO NORTH CANTON FOR SERVICE.
A
B
Attach nozzle and wands
The wand with the storage clip
connects to the power nozzle.
Attach it to power nozzle by fitting but-
ton projection (B) on nozzle connector
(C) into opening near end of wand. Be
sure nozzle is locked in place.
To release, press down on center of
latch (D) and remove nozzle.
5
5
C
E
G
H
6
6
7
7
Continued
➟
D
F
How to assemble