Hoover 7010 Vacuum Cleaner User Manual


 
Maintenence
Maintenance
Ensure the vacuum cleaner is not connected to the power supply when
performing any maintenance procedures. Use a damp cloth and mild
detergent when cleaning the appliance.
Motor Filter Cleaning
Warning: Ensure the cleaner is not connected to the power supply when
performing any maintenance procedures.
Vacuum Cleaner Storage
When not in use, ensure the cleaner is not connected to the
power supply, and pull the power cable gently out of the
power socket. Step on the automatic cord rewind button to
reel in the power cable fully.
Store the cleaner in a cool dry location.
Dust Canister Cleaning
Remove the rubbish in the dust canister frequently to avoid
unnecessary blockages that may lead to failure of the motor
in prolonged occurrences.
Clean the dust canister only after the power cable of the
cleaner has been removed from the power supply.
Hold the dust canister over the rubbish bin (bag), press down
the dust release button of the dust canister, the bottom cover
of the dust canister will automatically open allowing you to
clear and empty the dust barrel.
Press the handle of the dust canister to remove the dust
canister from the cleaner. Remove the top cover on
the canister and then remove the filter. The filter can
be cleaned by using a brush under luke warm water.
Alternatively a new filter can be used as a replacement.
Caution:
It is normal that the white central filter in the dust barrel
may change color, which will not affect its filtration
performance. If the hose and the central filter are difficult
to clean, it is recommended to use warm water to clean;
ensure the filter is dry before reinstalling into the cleaner.
Key Points:
Please note: when the dust canister or the filter cover
is not installed correctly, the vacuum cleaner will not
function correctly. If the cleaner is not functioning
correctly, check that the dust canister and the filter
cover have been installed correctly.
Caution: Ensure the suction passage is always
unobstructed, otherwise the motor may overheat.