Filter
Top Products
When using cleaning tools, cleaner handle should be in
the upright position. Also, turn cleaner OFF before dis-
connecting and connecting hose to hose tube (A).
To use hose, lift hose end as shown.
A
REMOVING HOSE
3.1
A. Dusting brush may be used for carved furniture, table
tops, books, lamps, lighting fixtures, venetian blinds,
baseboards, shutters, and registers.
B. Furniture nozzle may be used for upholstered furniture,
draperies, mattresses, clothing, automobile interiors, and
carpeted stairs.
C. Crevice tool* may be used in tight spaces, corners
and along edges in such places as dresser drawers,
upholstered furniture, stairs and baseboards.
D. Extension wands are used to give extra length to your
hose. Use them with any of the above tools.
*Available on select models only.
3.2
3. TOOLS
SELECT PROPER TOOL
A
B
C
D
9
I
H
3.3
ATTACH WAND AND TOOLS
Attach tool, wand or crevice tool* to the hose (H) by
pushing it firmly into the hose. Attach second wand, tool
or crevice tool* to the wand in the same manner.
Twist wand or tool slightly to tighten or loosen the con-
nection.
For models with crevice tool, the dusting brush (I) can be
attached to the crevice tool*.
*Available on select models only.
HOW TO
CLEAN TOOLS
To clean the hose, wipe
off dirt with a cloth damp-
ened in a mild detergent.
Rinse with a damp cloth.
Cleaning tools may be
washed in warm water
with a detergent. Rinse
and air dry before using.
Tools allow for cleaning surfaces above the floor and for
reaching hard to clean areas.
The vacuum is ready for tool use when handle is in
upright position.
IMPORTANT
Brushroll continues to turn while product is turned on
and handle is in upright position. To avoid damage to
carpet, rugs, furniture and flooring, avoid tipping
cleaner or setting it on furniture, fringed area rugs, or
carpeted stairs during tool use.
CLEANING TOOLS