Filter
Top Products
6
2. HOW TO USE
VACUUM DESCRIPTION
1. Handle
2. Cord Hooks: wrap cord around
hooks for storage. The top hook
can be rotated right or left for
easy cord release.
3. Hose
4. ON/OFF Switch: located on left
rear corner of cleaner body
5. Carry Handle
6. Bag Door
7. Stair Cleaning Handle: located
on lower edge of bag door
8. Handle Release Lever: step on
lever to lower handle to operating
or low positions
9. Headlight*
10. Nozzle Control Knob: slide knob
to correct setting for height of
carpet being cleaned
11. Furniture Guard: helps prevent
cleaner from marking furniture
12. Embedded DirtFINDER™
display*
13. DirtFINDER™ Sensitivity Switch*
14. Wands
15. Check Bag Indicator*
16. Final Filter Exhaust
17. Dusting Brush
18. Crevice Tool*
19. Furniture Nozzle
20. Hose Hook
1.8 1.9
ATTACH HOSE
1.8 Slide hose(A) into dirt duct(B) and twist hose to lock
it into place.
1.9 Position hose over hose hook (D) and into hose
tube (E).
B
A
D
E
1.10 1.11
POSITION TOOLS
1.10 Place smaller unridged end of wand into bottom of
rack. Snap wand into clip. Repeat with other wand.
1.1 1 For models with tools on back, snap ends of dusting
brush (A), crevice tool (B) and furniture nozzle (C) into
clips as shown.
C
B
A
*Available on select models only.
Foot design may vary per model.
IMPORTANT
Hose must be connected as shown for all opera-
tions.
2.1
1
2
3
16
4
5
6
13
7
9
10
11
12
15
14
2
8
16
4
17
20
2
19
18