Filter
Top Products
Assembly
1. Fitting or removing the flexible hose
Fitting:
Insert the flexible hose into the air intake duct of the vacuum.
Press until it clicks into position.
Removing:
Remove the plug from the power socket and then release
the flexible hose from the air intake duct by depressing the
two buttons.
2. Fitting the extension rods and accessories
a. Fit the extension rod to the handle, gently insert the handle
into the extension rod and push until it clicks in place.
b. Fit the floor head to the extension rod, gently insert
the extension rod into the floor head and push until
it clicks in place.