Filter
Top Products
Maintenance (continued)
Cleaning and changing the Air Inlet Filter (continued)
Cleaning the Motorised Powerhead
1. Pull dustcup upward.
2. Take out the sponge from the machine.
3. Clean as per the above directions and replace back
into machine once completely dry.
4. Replace the sponge filter with a new
sponge filter when required.
The rotating brush must be free of debris for effective cleaning and
maximum suction. Disconnect the motorised powerhead and turn
it over to inspect the bottom. If a buildup of debris is wound around
the rotating brush, remove by carefully cutting with scissors. Avoid
damaging or cutting the bristles.