Filter
Top Products
Motor Filter Cleaning
Warning: Ensure the cleaner is not connected to the power supply when
performing any maintenance procedures.
Remove the top cover on the canister and then remove the filter.
The filter can be cleaned by dusting with a brush. Alternatively a
new filter can be used as a replacement.
Note:
It is normal that the white central filter in the dust barrel may
change colour, which will not affect its filtration performance.
Key Points:
Please note: when the dust canister or the filter cover is not
installed correctly, dust can get through the motor and cause
damage to the vacuum. After cleaning, always check that the
dust canister and the filter cover have been installed correctly.
Caution: Ensure the suction passage is always unobstructed,
otherwise the motor may overheat.
Maintenance (continued)
Press the handle of the dust canister to remove the dust canister from the cleaner.