Hoover 5012PH Vacuum Cleaner User Manual


 
Troubleshooting
Fault Treatment
The cleaner will not turn on.
Check that the power cable is inserted securely; remove from
the power supply and then reinsert into the power supply.
Check that the on/off switch is in the “ON” position.
The vacuum performance is
deteriorating.
Check the appliance to ensure there are no blockages.
Clear any blockages that may be found.
Check that the air-inlet filter gauze is not dusty; frequently clean
rubbish or replace air-inlet and air-outlet HEPA filters.
The cleaner makes an abnormal
sound when switched on.
Turn off the cleaner immediately.
Check the appliance to ensure there are no blockages.
Please clear any blockages that may be found.
Part Part Number
Dust Container 33151774
Filter, HEPA, assembly and inlet 33200819
Cord Retract Assembly 33200768
Please contact Hoover Customer Care: 1300 360 845 to find your local spare parts provider.
Troubleshooting
Problems and solution
If you come across a problem, please use the checklist of troubleshooting tips before ringing
Hoover Customer Care.