Filter
Top Products
Maintenance
Rear Motor HEPA Filter Replacement
The rear motor filter is installed behind the air outlet grid,
this filter is washable. When dust or dirt is visible on the
surface of the filter, the filter should be replaced or washed
with warm water to maintain efficient suction.
It is required to clean and replace the filters for the motor,
after they have been used for 6 - 12 months. This may vary
depending on frequency of use. Remember to ensure all
filters have been correctly installed into the cleaner before
using the cleaner.
Key Points:
The power supply of the cleaner must be cut off before
replacing any filter!
Cleaning and changing the Air Inlet Filter
• The air inlet filter should be cleaned at least twice a year or when it
becomes visibly dirty.
• Always operate the cleaner with filters installed, otherwise, reduced
suction or motor damage may result.
• Disconnect from electrical outlet, before cleaning filter.
• Do not use a washing machine to rinse filter.
• Do not use hair drier to dry it.
• Filter must be completely air dry before re-assembling.