Honeywell RPWL800A Door User Manual


 
Contents
Features ...................................................1
The VisioCam system ................................ii
Checking Pack Contents ........................... ii
Setting up ................................................2
Pre-installation Setup ................................2
Installing the Door Camera......................4
Door Camera TransformerOption ..............7
Installing the receiver ..............................8
Receiver Operation ....................................8
Door Camera ............................................10
Expanding Your System .........................11
Maintenance and Use ............................12
Care and Maintenance ............................12
Replacing the Receiver Batteries ...........12
Troubleshooting .......................................13
Specifications ........................................15
Declaration ...............................................16
Disposal and Recycling ...........................16
Guarantee .................................................16
Thank you for choosing this Honeywell product. Please carry out the following the
instructions to ensure correct installation and use, and keep these notes in a safe
place for future reference.
Before you mount the door camera or receiver in a permanent place, make
sure that you have tested the two units and that the system works in the loca-
tion you have chosen! (See ‘Setting up’, beginning on the next page.)
THE VISIOCAM SYSTEM
Your Honeywell wireless video entry system uses radio signals to transmit a video
picture of the caller from the door camera to the receiver. The system is expand-
able, so you can install additional surveillance cameras, or a second door camera if
required.
CHECKING PACK CONTENTS
The following items are included in the
pack:
Chime Kit
Door camera transmitter unit
Receiver unit with LCD display
Receiver charging base
RCA connection lead
Six No. 8 screws for wall mounting
Six wall plugs
Camera Only
Door camera transmitter unit
Four No. 8 screws and plugs for wall
mounting
You will need:
6 x AA alkaline batteries for the door
camera
A No. 2 Phillips screwdriver
A 1/4-in. (6 mm) dia. masonry drill
A large flat-bladed screwdriver
69-2108EFS—01 ii
69-2108EFS_A.indd 2 11/30/2007 1:51:44 PM