Honeywell CT3650 Manual

A SERVICE OF

next previous

15 69-1285—2

Program the First Day

Start b

y

pro

g

rammin

g

the wake time and temperature for one da

y

.

❑ Press and release .

❑ Press until the desired da

y

displa

y

s. (Mon, Tue, Wed, Thu, Fri, Sat, Sun)

❑ Press time

or until the desired time shows in the displa

y

.

NOTE: Pro

g

ram times are in 15 minute intervals. For example, 8:00, 8:15, 8:30.

❑ Press

or until the desired wake temperature displa

y

s.

The setpoint temperature ran

g

e is 40°F to 90°F (4.5°C to 32°C) for heatin

g

and 45°F to 99°F (7°C to 37°C) for coolin

g

.

❑ Press to switch between setpoints.

NOTE: Pro

g

ram times are the same for heatin

g

and coolin

g

.

❑ Press

or until the displa

y

shows the desired temperature setpoint.

NOTE: You can pro

g

ram the fan to On or Auto for each pro

g

ram period. Settin

g

Fan to On runs the s

y

stem fan

continuousl

y

in the pro

g

ram periods.

❑ Press until the fan is at the desired settin

g

(On or Auto).

❑ Press , or and repeat these steps for each pro

g

ram period. The first da

y

is now pro

g

rammed.

❑ Repeat each step in Pro

g

ram the First Da

y

for the rest of the week.

NOTE: After the first da

y

is pro

g

rammed,

y

ou can cop

y

that da

y

to an

y

other da

y

usin

g

procedure in Cop

y

a Da

y

.

❑ Press when the entire week is pro

g

rammed.

Wake

Day

Heat/Cool

Settings

Fan

Leave

Return

Sleep

Run

Program