Filter
Top Products
– 5 –
PLUMBING CONNECTIONS
WARNING: PLUMBING CONNECTIONS MUST COMPLY WITH APPLICABLE SANITARY, SAFETY
AND PLUMBING CODES.
1. Connect the water supply line to the two
3
/8" copper tube inlets as identified at the rear of the
steamer.
2. Install the line strainer provided in the steam generator fill line.
• Provide a manual shutoff valve convenient to the steamer for descaling.
DRAIN CONNECTIONS
The drain connection (Fig. 2) must be:
• 1" IPS (iron pipe size) down, preferably with one elbow
only.
• Maximum length of 6 feet (1.8 m).
• Piped to an open gap type drain.
CAUTION: In order to avoid any back pressure in the
steamer, do not connect solidly to any drain connection.
ATADLACIRTCELE
latoT
WK
hP/zH/stloV
esahPrePsttawoliK
spmAdetaR
eziStiucriC
)spmA(
roeziSesuF
*eziSrekaerBtiucriC
)spmA(
09 ° reppoCC
eziSeriW
esahP3
eriWeniLrePspmA
esahP1
spmA
2L-1L3L-2L3L-1L1L2L3L
5.71/06/802
6305058
5.71/06/042
1354548
5.73/06/802
5.25.25.2121212 030301
5.73/06/042
5.25.25.2818181 525241
5.73/06/084
5.25.25.2999 515161
011/06/802
8406068
011/06/042
2406068
013/06/802
3.33.33.3828282535301
013/06/042
3.33.33.3424242535301
013/06/084
3.33.33.3212121515161
511/06/802
2709096
511/06/042
3609096
513/06/802
555242424 06068
513/06/042
555636363 05058
513/06/084
555818181 525241
roesuFyaleD-emiTtnemelElauD*
rekaerBtiucriCemiTesrevnI
07APFN/ISNAedoClacirtcelElanoitaNehthtiwecnadroccanidelipmoc)mumixaM(eziSrekaerBtiucriC/esuF&)muminiM(eziStiucriC
.)noitidetsetal(
PL-50880
20 (500)
MIN.
2 (500)
1 1/4 NPT TO OPEN
GAP DRAIN
BY CUSTOMER
DRAIN VENT
BY CUSTOMER
Fig. 2