Filter
Top Products
– 15 –
MAINTENANCE
WARNING: THE STEAMER AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING,
CLEANING OR SERVICING THE STEAMER. THE COOKING COMPARTMENT CONTAINS LIVE
STEAM. STAY CLEAR WHEN OPENING DOOR.
REMOVAL OF LIME SCALE DEPOSITS
Steamers equipped with a Delime Generator Light.
• Steamer should be delimed at a convenient time after the Delime Generator Light comes on.
Steamers without a Delime Generator Light.
• Steamer should be delimed once a month, or more often if necessary, if a build-up of lime scale
deposits is present.
Deliming and Cleaning Steamer
Use the CLR Treatment Kit available from your Hobart-authorized service office.
The following instructions only apply when using the CLR Treatment Kit to delime the steam generator.
Instructions are also available when you purchase the CLR Treatment Kit.
WARNING: READ AND FOLLOW THE INSTRUCTIONS ON THE CLR BOTTLE. USE PLASTIC OR
RUBBER GLOVES TO AVOID SKIN CONTACT. IF CLR LIQUID COMES IN CONTACT WITH THE
SKIN, RINSE WITH CLEAN WATER.
STEP 1. Turn the main power switch OFF to drain the steam generator. Set the cooking timer to zero.
If there is a Delime Generator Light, turn the main power switch to DELIME.
ALTERNATE STEP 2. If the Deliming Plug is
outside on the left side panel (Fig. 5), remove the
top plug and turn the main power switch ON.
Fig. 5
STEP 2. If the Deliming Plug is inside the cooking
compartment (Fig. 4), unscrew the plug so the hole
points upwards.
Fig. 4
PL-51511
FUNNEL
BEAKER
DELIMING PLUG
PLASTIC TUBE
PL-50823
Deliming Plug
Drain Plug
Left Side Panel