Filter
Top Products
• Stainless plasma air purifying (Fan) operation is the combined operation mode of the fan operation and the
electric dust collector operation.
• If the stainless plasma air purifying mode is set while the air conditioner is in basic operation mode, the air
purifying function by the electric dust collector will operate together.
Press the (AIR PURIFYING) button.
• Adjust the fan speed to your preference. “HI”, “MED”, “LOW”, “SILENT”
can be selected.
• When only stainless plasma air purifying operation is set,
and (ON TIMER) preset cannot be done.
(OFF TIMER)
Press the (STOP) button.
• A short beep sounds and stainless
plasma
air
purifying
operation
stops.
STOP
Press the (AIR PURIFYING) button.
CANCEL
during
operation
POWERFUL OPERATION
•
• The airflow will be extended so that the air can reach even further during powerful operation.
(Extended Airflow)
Press the (POWERFUL PERATION) button during operation.
• A short beep sounds and the preference (Powerful) operation starts.
( POWERFUL) indicator lit on the remote controller.)
CANCEL
Press the (POWERFUL PERATION) button again.
• POWERFUL) indicator turns off on the remote controller.
Operation mode In this situation Operating mechanism
Heating
• When you want the room to be
a little warmer
• Set approximately 2°C higher than the preset
temperature. Powerful heating operation is
performed.
Cooling
• When you want a little cooler
air
• When you want the room to be
a little cooler
Auto Dehumidifying
• When you want to remove
humidity a little faster
• Laundry drying efficiency is enhanced.
• Condensation-control efficiency is enhanced.
Dehumidifying
• Set approximately 3°C lower than the preset
temperature. Powerful cooling operation is
performed.
• High speed dehumidifying operation is performed
aiming to achieve humidity of approximately 40%.
Condensation
Control
Quick Laundry
By pressing the (POWERFUL PERATION) button during auto, heating, dehumidifying, cooling or stainless
plasma air purifying operation, the air conditioner performs the “Powerful” operation.
STAINLESS PLASMA AIR PURIFYING (FAN) OPERATION
– 18 –