Filter
Top Products
— 6 —
SAFETY - Continued
WARNING
11. KEEP VISITORS AWAY.
Do not let visitors handle the Nailer. All visitors should be kept
away from work area.
12. DRESS PROPERLY.
Do not wear loose clothing or jewelry as they can be caught in
moving parts. Rubber gloves and nonskid footwear are recom-
mended when working indoors. Wear protective hair covering
to contain long hair.
13. NEVER USE NON RELIEVING COUPLER ON NAILER.
If a non relieving coupler is used on the Nailer, the Nailer can
remain charged with air after disconnecting and thus will be
able to drive a fastener even after disconnecting. The Nailer and
air hose must have a hose coupling such that all pressure is re-
moved from the Nailer when the coupling joint is disconnected.
14. CHECK SAFETY BEFORE USE.
Make sure the safety trigger operates properly. Never use the
Nailer unless the safety trigger is operating properly, otherwise
the Nailer could drive a fastener unexpectedly. Do not tamper
with or remove the safety trigger, otherwise the safety trigger
becomes inoperable.
15. KEEP ALL SCREWS AND COVERS TIGHTLY IN PLACE.
Keep all screws and covers tightly mounted. Check their condi-
tion periodically. Never use the Tool if parts are missing or
damaged.
16. DO NOT LOAD FASTENERS WHILE RAM CAP IS CONTACTED
OR SAFETY TRIGGER IS OPERATED.
When loading fasteners into the Nailer or when connecting the
air hose,
1) Do not contact the ram cap.
2) Do not depress the safety trigger; and
3) Keep the Tool pointed downward.
17. KEEP FACE, HANDS AND FEET AWAY FROM DISCHARGE AREA
DURING USE.
Never place your face, hands or feet closer than 8 inches (200
mm) from discharge area. A serious injury can result if the fas-
teners are deflected by the work piece, or are driven away from
the point of entry.
English