Filter
Top Products
— 11 —
English
SPECIFICATIONS
Model NT50AGF
Operating Pressure 90-115 psi (6.2-7.9 bar
6.3-8.1 kgf/cm2)
Actuation Hammer Actuated with Safety
Interlock
Dimensions
Length x Height x Width
20” x 19” x 3”
(508 mm x 483 mm x 76 mm)
Weight 13 lbs (5.9 kg)
Nail Capacity 175 Nails
Air Consumption .064 ft3/cycle @ 90 psi
(1.81 ltr/cycle @ 6.2 bar)
(1.81 ltr/cycle @ 6.3 kgf/cm2)
Air Inlet 3/8” NPT Thread
NAIL SELECTION
Only nails shown in the table below can be driven with this Nailer.
WARNING
Be sure to use only the genuine HITACHI fasteners for the NT50AGF.
The use of any other nails can result in tool malfunction and/or
nail breakdown, leading to serious injuries.
Min. Max.16 gauge
T flooring nails
2” (50mm)
.23”(5.80mm)
.06”(1.53mm)
1-3/16” (30mm)