Filter
Top Products
— 4 —
SAFETY
IMPORTANT SAFETY INSTRUCTIONS
FOR USING TOOLS
READ ALL INSTRUCTIONS
DANGER
1. OPERATORS AND OTHERS IN WORK AREA MUST WEAR
SAFETY GLASSES WITH SIDE SHIELDS.
When operating the Tool, always wear eye
safety glasses with side shields, and make
sure others in the work area wear safety
glasses, too.
Safety glasses must conform to the re‑
quirements of American National Stan‑
dards Institute, ANSI Z87.1 and provide
protection against flying particles both
from the front and side.
The employer must enforce the use of safety glasses by the
Tool operator and others in work area.
2. NEVER USE OXYGEN OR OTHER BOTTLED GASES.
EXPLOSION MAY OCCUR.
Never use oxygen, combustible gases or
any other bottled gases as a power source
for the Tool.
Use of the above gases is dangerous, as
the Tool will explode.
Use only clean, dry, regulated compressed
air.
WARNING
3. NEVER POINT TOOL AT YOURSELF OR OTHERS IN WORK AREA.
Always assume the Tool contains
fasteners.
Never point the Tool at yourself, toward
yourself or others whether it contains
fasteners or not.
If fasteners are mistakenly driven, it can
lead to severe injuries.
Never engage in horseplay with the Tool.
Respect the Tool as a working implement.
English