Filter
Top Products
— 13 —
English
FASTENER SELECTION
Only fasteners shown in the table below can be driven with
this Tool.
WARNING
Be sure to use only the genuine HITACHI fasteners for the NT50AF /
N5009AF. The use of any other fasteners can result in tool mal-
function and/or fastener breakdown, leading to serious injuries.
Dimensions of nails (NT50AF)
Dimensions of staples (N5009AF)
Min. Max.15 gauge staples
1/2”(13mm)
.07”(1.8mm)
1‑1/2”(38mm)
2”(50mm)
Min. Max.16 gauge T & L nails
2” (50mm)
.23”(5.80mm) .12”(3.15mm)
.06”(1.53mm)
.26”(6.60mm)
1‑1/2” (38mm)
1‑3/16” (30mm)