Filter
Top Products
HP ProLiant Essentials Rapid Deployment Pack—Windows Edition Support Matrix 7
Supported Target Platforms
The Rapid Deployment Pack supports deployment to the target platforms listed in Table 1.
Table 1: Supported Target Platforms
HP blade PC bc1000 ProLiant DL360 G4 (SCSI)
4
ProLiant ML330
ProLiant BL10e ProLiant DL360 G4p (SATA)
4
NEW ProLiant ML330e
ProLiant BL10e G2 ProLiant DL360 G4p (SCSI)
4
NEW ProLiant ML330 G2 (ATA)
2
ProLiant BL20p ProLiant DL380 ProLiant ML330 G2 (SCSI)
ProLiant BL20p G2
1
ProLiant DL380 G2 ProLiant ML330 G3 (ATA)
2
ProLiant BL20p G3 ProLiant DL380 G2 Packaged Cluster ProLiant ML330 G3 (SCSI)
1
ProLiant BL25p ProLiant DL380 G3
1
ProLiant ML350
ProLiant BL30p ProLiant DL380 G3 Packaged Cluster
1
ProLiant ML350 G2
ProLiant BL35p ProLiant DL380 G4
4
ProLiant ML350 G3
1
ProLiant BL40p
1
ProLiant DL380 G4 Packaged Cluster ProLiant ML350 G4
ProLiant BL45p NEW ProLiant DL385 ProLiant ML350 G4p (SATA) NEW
ProLiant DL140
2
ProLiant DL560
1
ProLiant ML350 G4p (SCSI) NEW
ProLiant DL145
2
ProLiant DL580 ProLiant ML370
ProLiant DL320 (ATA) ProLiant DL580 G2
1
ProLiant ML370 G2
ProLiant DL320 (SCSI) ProLiant DL580 G3 NEW ProLiant ML370 G3
1
ProLiant DL320 G2 (ATA)
1, 2
ProLiant DL585
4
ProLiant ML370 G4
ProLiant DL320 G2 (SCSI)
1
ProLiant DL740
1
ProLiant ML530
ProLiant DL320 G3 (SATA)
3
ProLiant DL760 ProLiant ML530 G2
ProLiant DL320 G3 (SCSI) ProLiant DL760 G2
1
ProLiant ML570
ProLiant DL360 ProLiant ML310 (ATA)
1, 2
ProLiant ML570 G2
ProLiant DL360 G2
1
ProLiant ML310 (SCSI)
1
ProLiant ML570 G3
ProLiant DL360 G3
1
ProLiant ML310 G2 (SATA)
3
ProLiant ML750
ProLiant DL360 G4 (SATA)
4
ProLiant ML310 G2 (SCSI) VMware ESX Server 2.5.1 virtual
machine
1
After certain deployment operations, the MAC address of the server might be set to 0. To resolve this issue, apply
SoftPaq SP26187. Refer to Table 2 when applying this update to any ProLiant server with the NC7770
stand-up NIC.
2
Disk drive size must be smaller than 137 GB to successfully complete image capture and deploy with ATA RAID.
3
RAID set through the ROM-Based Setup Utility (RBSU) is not supported.
4
The server might stop responding when loading the Q57.DOS network driver. To resolve this issue, apply SoftPaq
SP26187.