Filter
Top Products
Heatilator • Novus NNXT • 4055-879 • Rev. o • 2/1264
S. Install Floor Cover
Install the fl oor cover as shown in Figure 15.20.
Figure 15.20 Installing Floor Cover
Note: The fl oor cover in the bottom front of the fi replace
may be covering the UL labels. It is loose and can be
removed/replaced.
• Bend four legs at 90° angle as shown in Figure 15.18.
Bend to a 90° angle
Figure 15.18 Bend Control Heat Shield Legs
• Place over control plate so that all of the control plate is
covered and legs are on bottom pan of appliance. See
Figure 15.19.
Figure 15.19 Control Heat Shield - Installed
• Make sure all wires are under the top of the control heat
shield and that there are no wires pinched between legs
and the bottom pan.
Control Heat Shield in Place