Filter
Top Products
Heatilator • Novus NNXT • 4055-879 • Rev. o • 2/1260
15
15
Appliance Setup
A. Remove the Packaging
Remove the shrink fi lm, corrugated top cap, bottom cap
and column protectors from the appliance. The appliance
should look as shown in Figure 15.1.
B. Remove Screen Package Assembly
• Grasp the top of the screen package and lift up to
remove. See Figures 15.2 and 15.3.
Figure 15.1 Appliance Unwrapped
Figure 15.2 Lift up on Screen Package
Figure 15.3 Remove Screen Package
C. Remove the Shipping Materials
Remove the shipping materials from inside or underneath
the fi rebox.
Latches
(both bottom
and top)
Glass
Assembly
Figure 15.4 Glass Assembly
D. Removing Fixed Glass Assembly
WARNING! Risk of Asphyxiation! Handle fi xed glass
assembly with care. Inspect the gasket to ensure it is
undamaged and inspect the glass for cracks, chips or
scratches.
DO NOT:
• Strike, slam or scratch glass
• Operate fi replace with glass removed, cracked,
broken or scratched.
Replace fi xed glass assembly as a complete assembly.
• Remove screen.
• Pull the four (30/33/36 in. appliances) or seven (42 in.
appliance) glass assembly latches out of the groove on
the glass frame. Refer to Figure 15.4.
• Remove the glass assembly from the appliance.
E. Remove Top Log Pack
The top log pack is shipped inside the fi rebox. When you
remove the glass, the log pack will come out also.
F. Remove Packing Material
• Remove packing material (Figure 15.5).
Figure 15.5 Remove Lytherm Pieces