Filter
Top Products
The diagram below shows how to properly position,
level, and secure the fireplace.
1. Place the fireplace
into position.
2. Level the fireplace
from side to side and
from front to back.
3. Shim the fireplace
with non-combustible
material, such as
sheet metal, as
necessary.
4. Secure the fireplace to
the framing by nailing
or screwing.
Figure 8. Proper Positioning, Leveling, and
Securing of a Fireplace
Step 5
Positioning,
Leveling, and
Securing the
Fireplace
!
!
Intermittent Pilot Ignition (IPI) System
This system includes 3V control valve, electronic
module and intermittent pilot.
WARNING: 110-120 VAC MUST NEVER
BE CONNECTED TO A CONTROL
VALVE IN A MILLIVOLT SYSTEM.
WARNING: THIS UNIT IS NOT FOR USE
WITH SOLID FUEL.
Step 6
The Gas Control
System
NAILING TABS
AT BASE OF
FIREPLACE.
Heat & Glo • ST-42TVFL-IPI • 455-902 Rev. C • 12/07
16