Filter
Top Products
Heat & Glo • 6000GLX-IPI-S/-R, 6000GLX-IPILP-S/-R • 2101-900 Rev. Q • 11/0856
Figure 14.18 Top View
Figure 14.18 Top View
STEP 7. Log #5 (SRV2101-195): Place log #5 on top of log #1 and log #4. The bottom of this log has two slots in it
that both go over the two tabs molded in the top of log #1.
STEP 8. Log #6 (SRV2101-196): Place log #6 on top of log #2 and the grate. There is a slot in the bottom of this
log. Place the slot over the tab on top of the right end of log #2. The end of this log has a square notch in it that rests into
the second tine from the right on the grate. Note: May be necessary to tilt grate forward to interlock bottom notch in log.
STEP 9. Log #7 (SRV530-703): Place log #7 on top of log #1 and the grate. The lower right end of the log rests
against the second tine from the left on the grate.
Figure 14.20 Top View
Figure 14.20 Top View
Figure 14.22 Top View
Figure 14.22 Top View
5
5
6
6
7
7
5
5
6
6
7
7
Figure 14.19 Front View
Figure 14.19 Front View
Figure 14.21 Front View
Figure 14.21 Front View
Figure 14.17 Front View
Figure 14.17 Front View