Filter
Top Products
Heat & Glo • 6000GLX-IPI-S/-R, 6000GLX-IPILP-S/-R • 2101-900 Rev. Q • 11/0818
5
5
Framing and Clearances
A. Selecting Appliance Location
When selecting a location for the appliance it is important to
consider the required clearances to walls (see Figure 5.1).
WARNING! Risk of Fire or Burns! Provide adequate
clearance around air openings and for service access.
Due to high temperatures, the appliance should be locat-
ed out of traffi c and away from furniture and draperies.
NOTICE: Illustrations refl ect typical installations and are
FOR DESIGN PURPOSES ONLY. Illustrations/diagrams
are not drawn to scale. Actual installation may vary due to
individual design preference.
Figure 5.1 Appliance Locations
1/2 IN.
REAR VENT,
HORIZONTAL TERMINATION,
TWO ELBOWS
REAR VENT,
NO ELBOWS
REAR VENT,
ONE ELBOW
ALCOVE
INSTALLATION
TOP VENT
ONE 90º ELBOW
A
A
B
C
B
E
D
B
D
B
B
D
D
F
G
H
ABCD E F G H
Inches 51 42 72 56-5/8
See Section D.
Mantel Projections
22 17-3/4 8
Millimeters 1295 1067 1829 1438 559 451 203