Filter
Top Products
Heat & Glo • 6000CMOD-IPI, 8000CMOD-IPI • 2241-900 Rev. H • 5/1250
Figure 13.8 Finishing Material 1 Inch Thick or Less
DOOR
1 in. MAX.
FINISHING MATERIAL
(TOP EDGE)
Finishing materials 1 inch maximum thick.
Stop fi nishing material fl ush with opening.
NON-COMBUSTIBLE
FINISHING MATERIAL
Finishing Material:
1 Inch Thick or Less - Overlap Fit Method
DOOR FIT
FINISH MATERIAL
THICKNESS
SEE
FIGURE
CMOD-8-BK
CMOD-8-GY
Overlap 1 inch thick or less 13.8
Inside 1-4 inches maximum 13.9
CMOD-6-BK
CMOD-6-GY
Overlap 1 inch thick or less 13.8
Inside 1-4 inches maximum 13.9
FOLIO Inside Any 13.10
Only doors certifi ed for use with this appliance model
may be used. Contact your dealer for a list of doors that
may be used. Once you have determined what kind of
door and fi nishing material is going to be used on the
fi replace, you may use the table below which shows the
door models and the fi nishing material thickness allowed.