Heat & Glo LifeStyle 6000C Indoor Fireplace User Manual


 
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev. T • 9/1242
CAUTION! Risk of Cuts, Abrasions or Flying Debris.
Wear protective gloves and safety glasses during instal-
lation. Sheet metal edges are sharp.
NOTICE: Once appliance is set up for top or rear venting,
it CANNOT be changed at a later time.
A. TopVent
9
AppliancePreparation
Figure9.1Cut the seal cap strap across the rectangles
next to the disk. For rear vent, skip this step.
Figure9.2Remove the white gasket material covering
the seal cap.
Figure9.4Remove the insulation basket and white insu-
lation from the center vent pipe.
Figure9.5Remove the insulation from the outer vent
pipe. For rear venting there is no insulation in the outer
vent pipe.
NOTICE: Once the seal cap has been removed it CANNOT
be reattached.
Figure9.3Remove the seal cap.