Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev. T • 9/1230
EXHAUST
SHIELD
FLUE
RESTRICTOR
TopVent-VerticalTermination
NoElbow
Figure7.6
Note:If installing a vertical vent/
termination off the top of the ap-
pliance, the ue restrictor should
be used.
V
1
V
1
=40ft.Max.(12.4m)
V
1
=3ft.Min.(914mm)
FlueRestrictorInstructions
1. Remove exhaust shield using a 1/4 inch nut driver by
removing the four screws securing it in place (see Figure
7.7).
Figure7.8FlueRestrictor
2. Break the ue restrictor into two pieces. Do this by
bending the part back and forth until it breaks (see
Figure 7.8).
Figure7.7
BREAK
HERE