Filter
Top Products
Heat & Glo • SL-350TRS-CE-D • 2033-900 Rev. N • 10/07
9
Figure 1. Diagram of the SL-350TRS-CE-D
When planning a fireplace installation, it’s necessary to determine:
• Where the unit is to be installed.
• The flue system configuration to be used.
• Gas supply piping.
• Electrical wiring.
• Framing and finishing details.
• Whether optional accessories—devices such as a fan, wall switch, or
remote control—are desired.
If the fireplace is to be installed on carpeting or tile, or on any combustible
material other than wood flooring, the fireplace should be installed on a metal
or wood panel that extends the full width and depth of the fireplace.
21-3/8 in.
544 mm
6 in.
153 mm
2-1/4 in.
58 mm
3-5/8 in.
93 mm
6-7/8 in.
174 mm
29-1/8 in.
741 mm
28-1/8 in.
714 mm
33 in.
837 mm
41-3/4 in.
1061 mm
8 in.
203 mm
GAS LINE
ACCESS
ELECTRICAL
ACCESS
6-5/8 in.
167 mm
15-7/8 in.
402 mm
15-1/8 in.
384 mm
32-1/2in.
827 mm
24 in.
610 mm
16-3/8 in.
414 mm
8-3/4 in.
223 mm
11-3/8 in.
289 mm
22-3/4 in.
577 mm
TOP HEAT SHIELD
(FLUE COLLAR COVER PLATE)
GAS
CONTROLS
HOOD
TOP STANDOFFS
GAS
ACCESS
BOTTOM
GRILLE COVER
RATING PLATE/LABELS
ELECTRICAL GAS