Filter
Top Products
Heat & Glo • SL-350TRS-CE-D • 2033-900 Rev. N • 10/07
36
LOG PLACEMENT
INSTRUCTIONS
Carefully remove the logs from the packaging. CAUTION: Logs are fragile!
LOG #1 (SRV327-701): Place log #1 at the rear of the unit, with the left edge behind the tab on the pilot
bracket. The right side sits behind the tab on the support bracket.
LOG #2 (SRV2033-701): Locate the bottom groove of log #2 over the left most grate bar and align over
the burner by placing the log slot over the burner tab as shown.
Log Set Assembly: LOGS-350CE-D
1
1
1
2
2
2
3
4
5
6
PILOT
BRACKET TAB
SUPPORT
BRACKET
BURNER TABS