Hearth and Home Technologies CD4842IR Indoor Fireplace User Manual


 
Heatilator • Caliber CD Series • 4040-263 Rev N • 11/0838
Figure 9.5 Outer Collar, Remove Four Screws
Figure 9.6 Remove Four Inner Collar Screws
Figure 9.9 Remove Inner Cover Plate
Figure 9.8 Outer Cover, Rear - Remove Plate
Figure 9.10 Place inner collar on Rear of Appliance
Figure 9.7 Outer Shell Cover
Remove four screws holding outer collar to appliance
top. See Figure 9.5. Remove outer collar.
Remove four screws holding inner collar to appliance
top. See Figure 9.6. Remove inner collar.
Remove four screws holding outer shell cover. See
Figure 9.7. Remove outer shell cover and set aside.
Remove four screws holding outer cover plate to
appliance back. See Figure 9.8. Remove outer cover.
Remove four screws holding inner cover plate to
appliance back. See Figure 9.9. Remove inner cover.
Place inner collar on appliance back and replace four
screws to hold this collar in place. See Figure 9.10. Make
sure insulation is attached to the collar base!