Harman Stove Company DVC-500 Stove User Manual


 
7
4 GLASS RE-
TAINER CLIPS
4 GLASS
RETAINER
BOLTS
GLASS
GLASS GASKET
DOOR
HINGE PINS
BRASS HANDLE
HANDLE BOLT
WOOD HANDLE
PAW BOLT
SET SCREW
Viewing glass
The glass in your Harman stove is a special ceramic glass.
Do not abuse the glass by striking or slamming the door.
Never burn the appliance if the door glass is cracked or broken.
Replace only with Harman supplied glass.
Soot and/or y-ash may accumulate on the viewing glass, and will ocassionally need to be cleaned.
Clean the glass with a soft cloth and mild glass cleaner. Do not spray cleaner on hot glass, and avoid the
use of abrasive cleaners.
Glass replacement
Carefully remove all remaining glass and gasket materials prior to replacing the glass.
Lay the door face down on a at surface. Remove the glass retainers and screws. Apply the gasket
material to the face of the new glass. Lay the glass into the door, making sure that the glass is contained
within the channels and raised areas of the door itself. Lay the glass retainers into position and install the
screws. Tighten each screw evenly to avoid making any stress points.