Filter
Top Products
26TROUBLE SHOOTING
Only For Qualified Installers
Look through hole in end of
log to see if a spark jumps
from the ignitor electrode to
the pilot when the ignitor
button is pushed.
Check ignitor wire and
connections from piezo ignitor
to ignitor ceramic at pilot.
Reconnect or replace
Ignitor wire.
Yes
No
Bad
OK
OK
Bad
No
Yes
Turn on gas valve
Is gas turned "on"?
Yes
OK
Purge gas line to stove
No
Replenish supply
Bad
OK
Replace Piezo Ignitor
Check Piezo Ignitor to make
sure the small wire on the
mounting flange is grounded.
Clean paint or rust
from around
mounting hole.
Replace
Check pilot orifice and
pilot line for blockage.
Is there gas in tank
(LP) or line (NG)
Check Ignitor Ceramic for
cracks
Pilot does not light
after many tries.
Evaluation notes were added to the output document. To get rid of these notes, please order your copy of ePrint IV now.