Filter
Top Products
Page 10SKU 92966
For technical questions, please call 1-800-444-3353.
Attaching the Needle
Replacement Needle Type: 135 X 17
1. Unplug the Power Cord from the electrical outlet.
2. Select a proper needle size according to the thread count and
type of material being sewn.
3. Turn the Hand Wheel until the needle bar reaches the highest
point of its stroke.
4. Loosen Screw (2) and hold Needle (1) with its indented part
facing toward the Presser Bar (5-18).
5. Insert the needle and push it up until it will go no farther.
6. While holding in place, securely tighten Screw (2).
Threading the Machine Head
Set the thread spool on its holder
and guide the thread through
the machine as illustrated to
the left. The numbers in the
illustration indicate the threading
sequence.