Filter
Top Products
Far distance monitoring
There is a pre-set far distance control communication interface on the
control panel of indoor unit. After installing the peripheral equipment
according to the manual attached with the Haier made far distance co-
ntrol detector, the computer management or other place monitoring can
be achieved to the air conditioner.
Operation points
Change of fan speed
In COOLING mode, the air sending is set at AUTO,
when the indoor temperature is near the set
temperature, the fan speed will lower automatically.
In HEATING mode, when room temperature reaches
the set temperature, the compressor will stop running,
and the fan will change to LOW FAN or stop.
In DEHUMIDIFYING mode, the fan speed will change
automatically.
3-minute protection function
If start the unit immediately only after it is turned off,
the compressor will start after 3 minutes have elapsed
to protect the compressor.
Operation of air conditioner
When the ambient humidity is too high, in
COOLING or DEHUMIDIFYING mode,
there may be water dropped in the air outlet.
1