Filter
Top Products
Assembling Your Duo
™
Steam Sweeper & Floor Sanitizer
1 2 3
Ready to Clean
To enable you to get the most
satisfaction from your Steam
Sweeper and Floor Sanitizer, be
sure to follow the assembly and
operating instructions included
in this manual. Read this manual
thoroughly before assembling
your unit.
After unpacking the Duo
™
, identify
the product parts before assembling.
Pay specific attention to the product
descriptions to familiarize yourself
with all the parts of your Steam
Sweeper and Floor Sanitizer. No
additional tools are needed to put
the unit together. It is quick and easy.
2
pg 6 877-HAAN DIRECT / 877-422-6347 www.HAANUSA.com
1
Insert the Easy Grip Handle onto the top end
of the silver upper ergonomic pole.
IMPORTANT NOTE: The upper pole has one
end that is indented and narrow. The narrow
end fits into the Pole Connection, NOT the
handle. See Fig under Step 2.
Align the indent in the pole to the ridge inside
the handle and the Locking Pin to the hole in
the handle. Hold the Locking Pin in, and slide
them together until the pin snaps into place.
Attach the upper pole once the handle has
been secured in place, to the lower pole at the
plastic connection. The narrow end of the upper
pole connects into the plastic pole connection.
Align the ridge to the front and the Locking Pin
to the hole in the plastic pole connection, and
while holding the Locking Pin in, slide the poles
together until the pin snaps into place.
Easy Grip
Handle
Upper
Ergonomic
Pole
Lower
Ergonomic
Pole
Unit Head
Pole Base
Pole
Connection
Ridge
towards
the front
Locking
Pin in
place
Ridge
towards
the front
Locking
Pin in
place
Indented Narrow End -
Note the indented end
that fits into the Pole
Connection.
Wider End of
Upper Pole fits
into handle