Filter
Top Products
Repair
ReplacingReplacing
Replacing
thethe
the
DataTrakDataTrak
DataTrak
BatteryBattery
Battery
FIREFIRE
FIRE
ANDAND
AND
EXPLOSIONEXPLOSION
EXPLOSION
HAZARDHAZARD
HAZARD
To reduce the risk of re and explosion, the battery
must be replaced in a non-hazardous location.
Use only an approved replacement battery (see
table). Use of an unapproved battery will void
Graco’s warranty.
ReplaceReplace
Replace
BatteryBattery
Battery
1. Unscrew cable from the back of the reed switch
assembly.
2. Remove the cable from the two cable clips.
3. Remove the DataTrak module from the bracket.
Take the module and attached cable to a
non-hazardous location.
4. Remove the two screws on the back of the
module to access the battery.
5. Disconnect the used battery and replace it with
an approved battery.
ApprovedApproved
Approved
BatteriesBatteries
Batteries
Energizer alkaline #522
Varta alkaline #4922
Ultralife lithium #U9VL
Duracell alkaline #MN1604
32334666B