Filter
Top Products
Installation
312747L 9
Installation
Hopper mounting kit 256259 allows the hoppers (D) to
mount on the sides or back of the frame (A).
1. Mount hoppers (D) on sides of the frame (A). See
F
IG. 3.
a. Attach main bracket (101) to frame (A) with
screws (107).
b. Repeat for second hopper (D) on opposite side
of frame (A).
2. Mount hoppers (D) on back of the frame (A). See
F
IG. 6.
NOTE: The solvent pump must be moved to the side
of the frame before the hoppers can be mounted to
the back. Follow sub-steps a and b to move the sol-
vent pump to either side of the frame.
a. Remove four screws (306) holding solvent
pump bracket (307) to mounting plate (308).
Leave pump attached to bracket. Remove pump
and bracket.
b. Use four screws (306) to attach solvent pump
and bracket (307) to side of frame.
F
IG. 3: Sides of Frame
107
101
A
FIG. 4: Remove Solvent Pump
F
IG. 5: Attach Solvent Pump to Side of Frame
306
308
307
306
307