Filter
Top Products
Operation
312747L 17
Operation
Startup
1. Ensure that the outer jacketed area is filled with
water mixture or oil and the accessories are cor-
rectly installed.
2. Follow Setup procedure in manual 312359.
3. See manual 312359 for testing material and opera-
tion instructions before spraying material.
Flush Hopper
1. Drain Spray Material. See page 19.
2. Flush hoppers and fluid inlet assemblies (F) with
compatible solvent before switching materials or
cleaning hopper (D). See Flushing section in man-
ual 312359.
3. Visually inspect the inside of the empty hopper for
any leakage of outer cavity heating fluid.
Shutdown
1. See Shutdown and Pressure Relief procedures in
manual 312359.