Filter
Top Products
Installation
312747L 11
7. Align holes on main bracket (101) and thread inserts
of the hopper (D). Loosely fasten hopper (D) to
bracket (101) with four screws (107) and washers
(110).
8. Connect swivel fitting (202) to nipple (201).
9. Tighten union (208) and ensure fluid outlet assem-
bly is aligned. See F
IG. 7 on page 10.
10. Tighten hopper mounting screws (107). See F
IG. 9.
11. Install screws (107) and bottom support (109).
12. Repeat steps 3-11 for second hopper (D).
F
IG. 9: Attach Hopper to Bracket
F
IG. 10: Connect Fluid Inlet Assembly to Hopper
107
101
D
110
201
202
F
IG. 11: Install Bottom Support
107
109
107
D