Filter
Top Products
Page 12.3
Calibrating the Temperature and Humidity Sensors
After calibration is complete, press the MODE button once to return to
normal operation.
Under normal circumstances it will not be necessary to adjust the
calibration of the temperature and humidity sensors. If calibration is
required, please contact a trained HVAC technician to correctly
perform the following procedure.
Place the thermostat in the
OFF mode.
12
Press the UP and buttons
at the same time twice. The
thermostat temperature will be
displayed and may be calibrated
using the UP or DOWN buttons.
DOWN
THERMOSTAT SENSOR
Evening
FanOn
AUXHEAT
COOL
AUTO
OFFON
Morning
DayNight
SuMoTuWeThFrSa
Service Filter
Pan UV Light
Program On
StartStop
DeHumidify
Setup
Outside
Vacation
LO
HI
188
88
88
18:88
Am
Pm
OFF
Pm
72
12:00
72
Air Conditionin
g
& Heatin
g
MODE
PRESS
TWICE
CALIBRATE
Press
button. While holding the
MODE button, press and hold
the FAN button for 5 seconds.
All icons will appear on the
display.
and hold the MODE
MODE