Filter
Top Products
To increase the cooling efficiency of your unit, the thermostat may be
programmed to continue running the fan after a call for cooling has
been satisfied. This delay may be set for 30, 60, or 90 seconds. If
the Fan Off Delay is set for zero seconds, the fan will not energize
after a call for cooling has been satisfied.
Set the Fan Off Delay
to 0, 30, 60, or 90
seconds.
Press the PROGRAM button to leave the Setup screens. If no buttons are
pressed, the display will leave the setup screens after 30 seconds.
Page 7.3
Setting the Fan-Off Time Delay
7
Note: Press the MODE
button momentarily
to move through the
setup screens. Press
and hold the MODE
button to move back-
wards through the
setup screens.
FanOn
Setup
3
:00
Air Conditionin
g
& Heatin
g
Press the MODE button repeatedly
until this setup screen appears.
Press
MODE
Press SETUP button to
enter Setup screens.