prodUCT speCifiCaTions
prodUCT speCifiCaTions
6 www.goodmanmfg.com SS-CPG180-240
airflow daTa — 15 Tons
0 1 2 3 4 5 6
BHP BHP BHP BHP BHP BHP BHP
0.2 0.00 6827 2.67 6394 2.28 5982 1.94
0.4 7079 3.20 6623 2.76 6161 2.34 5706 1.98 5271 1.66
0.6 6903 3.32 6405 2.83 5923 2.41 5434 2.02 4949 1.68
0.8 6717 3.42 6198 2.92 5668 2.45 5152 2.05
1.0 5975 2.99 5418 2.51
1.2 5147 2.55
0 1 2 3 4 5 6
BHP BHP BHP BHP BHP BHP BHP
1.0 6690 3.69 6008 3.02 5321 2.43
1.2 6653 3.95 5922 3.22 5182 2.58
1.4 6634 2.80 5857 3.44 5056 2.74
1.6 6638 4.55 5808 2.43 4948 2.91
1.8 6683 4.93 5784 3.95 4855 2.05
2.0 5803 4.27 4788 3.32
• Airow table represent dry coil with lters installed; SCFM correcon factor for wet coil is 4%.
• Any adjustment made to the blower should not cause the motor to draw more than the motor rated RLA. Applicaon that exceed the above could
require a larger motor. Minimum rated SCFM is 350 per ton.
• High-stac airow requires installaon of high kit (HSKT180G) or factory-built high-stac model.
• Unit factory shipped with the sheave set at 2.5 turns open.