Filter
Top Products
12
Consumer Support
Troubleshooting Tips Operating Instructions Safety InstructionsInstallation Instructions
Window installation instructions.
Prepare the Window
Cut the window sash seal to the window width
and stick the adhesive side to the bottom of
the sash.
Mark the centerline of the stool. Measure and
mark the locations for the support assemblies
from both sides of the centerline:
10,000 BTU models – 10
3
⁄8″ on each side
12,000 BTU models – 12
1
⁄2″ on each side
B
A
6
Window sash seal
Stool
Install the Side Accordion Panels
Slide the left and right accordion panels into
the top and bottom mounting rails.
Attach the accordion panels to the case using
4 Type A screws on each side.
BA
5
Type A screws
Top mounting rail
Bottom mounting rail
Accordion panel