Filter
Top Products
Consumer SupportTroubleshooting TipsOperating InstructionsSafety Instructions Installation Instructions
11
Install the Mounting Rails onto the Case
Remove the backing from the top mounting
rail seal strip and attach it to the bottom of
the top mounting rail.
Attach the top mounting rail onto the top
of the case with 5 Type A screws (on 10,000
BTU models) or 7 Type A screws (on 12,000
BTU models).
Attach the bottom mounting rail to the
bottom of the case from the inside, using
4 Type A screws.
NOTE: Refer to the label on the bottom mounting rail
for proper orientation of the rail.
C
BA
4
Type A
screws
Type A screws
Type A
screws
Type A screw
Type A screws
(for 12,000 BTU
models only)
Label