Filter
Top Products
Simon Security System 12
Note
For any keypress on the
Keychain Touchpad, hold
the button until the indicator
light blinks.
LOCK Press once to arm doors and windows.
LOCK Press twice to arm doors, windows, and Motion Sensors.
LOCK Press 3 times to arm doors, windows, Motion Sensors, and to acti-
vate the Latchkey option.
LOCK and UNLOCK
Press both buttons simultaneously for 3 seconds to send a panic (intru-
sion, silent, or non-medical emergency) alarm to the central monitoring
station. Check with the installer to find out how the keychain touchpad
panic buttons will operate
Note
Panic alarms need to be
silenced from the panel, a
remote handheld touchpad
or another keychain touch-
pad. They cannot be
silenced from the same key-
chain that activated the
alarm.
UNLOCK Press to disarm your security system.
STAR Can be programmed to control a device connected to a universal module.
RF Thermostat
Operation
These guidelines must be followed for RF Thermostat operation:
• The panel needs to be armed to Level 4 (Doors & Windows and Motion Sensors)
to enter Energy Saving Mode.
• If there are no Motion Sensors in the system, the Motion Sensors button must still
be pressed (armed to level 4).
• Both Option 81 and 82 can be turned on at the same time.
• Thermostat has to be in Auto Mode for Options 81 and 82 to work correctly.
• When the panel is disarmed the thermostat returns to normal operating mode.
Programming
Your System
The programming decals are visible when you open the panel cover (see Figure 1.).
These decals are designed to make system programming easier for you. Always begin
by entering your access code. Then, choose an operation from the START MENU.
Follow the prompts and flow arrows to complete the desired task. Notice the button
flow diagrams following the Instruction Summary.
Figure 1. Opening the panel cover
Programming Instructions
Use the following instructions to access the programming buttons and programming
decals.
Test Weekly
C O D E
Status
System
9 / 0
Windows
Doors &
Sensors
Motion
Disarm
5 / 6
Arm
3 / 4 7 / 8
On
Off
AUX
SensorMotion Time
FIRE
POLICE
Lights
Special
H O M E C O N T R O L
E M E R G E N C Y
H O M E S E C U R I T Y
Doors
Chime
32
978
10
645
Test
System should be checked
422-2806 Rev A
Set
Code
Access Clock
+
Delete
Delete
press
-
+
Hours
at least every three years.
To delete an option or access code
Hold key or press
and follow the voice
repeatedly until you
hear the desired item.
Note:
Cancel
and
Test
Cancel
DONE
Minutes
, then
DONE
See Note
If you make a mistake or want to
Sensor or Phone Test
follow the voice prompting.
To select a test, press
start over press
prompting.
by a qualified technician
Delete
START MENU
Add
Version 3
MAIN MENU
*
Remote
Sensor/
**
Control
Light
Option #
**
Sensors
-
*
Entry/Exit
Delay
CONTROL MENU
*
Press for program
information.
Instruction
Add Option
Summary
Unit #
Add
Press
Clock Set
Press
Set Clock
DONE
Chime Voice
Latchkey Time
Panel Voice
AddOption #
Press
Option #42:
Option #43:
Option #55:
Option #41:
Option #2:
Option #3:
Option #36:
Option #37:
See Note
Sensor Activated Light Lockout Start Time
Sensor Activated Light Lockout Stop Time
and follow voice prompts.
Pager Phone Number
Speaker Volume
Status Beep Volume
Option #1:
Panel Beeps
use red numbers to enter 4-digit code.
Add Access Code
Hours
Access Code
See Note
Minutes
Time
Cancel
1 / 2
1.
Press Down
2.
Open
Cove
r