Filter
Top Products
Simon Security System
9
Panel Indicator Lights
Use the following table to understand the panel indicator lights.
Numeric Pager
You may program your security system to send a numeric message indicating system
activities to your pager. The system will send the message twice. See “Programming
Instructions”.
Use the following table to determine what the numeric message is reporting.
Canceling and
Preventing
Accidental
Alarms
One of the biggest concerns you might have regarding your security system, is causing
an accidental alarm. Most accidental alarms occur when leaving the residence after
arming the system, or, before disarming the system upon your return.
Canceling Accidental Alarms
You may have up to 254 seconds (programmable by your installer) to cancel an acciden-
tal alarm. See your installer to find out what time is programmed. If the programmed
time has passed, you must call the central monitoring station to cancel the alarm.
You have ___ seconds to cancel an accidental alarm.
Panel Indicator Lights
Button
When the Button Light is
On
When the Button
Flashes
Arm Doors & Windows Doors/Windows armed Doors/Windows armed
& No Entry Delay on
Arm Motion Sensors Motion Sensors armed Motion Sensors armed
& Latchkey on
Disarm System disarmed System subdisarmed
System Status System trouble or Open Sen-
sor
System in alarm
Chime Doors Door will cause chime _________________
Chime Special Motion Motion will cause chime _________________
Time Lights Time activated lights on _________________
Sensor Lights Sensor activated lights on _________________
Numeric Pager Reporting
Reports Numeric Message Reports Numeric Message
Phone Test -101 -101 Intrusion -108 -108
AC Power Restore -102 -102 Fire -109 -109
AC Power Failure -103 -103 Disarming -110 -110
Latchkey -104 -104 Arming -111 -111
No Activity -105 -105 Fail to Disarm -112 -112
Panic Code -106 -106 Fail to Arm -113 -113
Emergency -107 -107